Is the Kingston FURY Beast DDR4-3200 CL16 compatible with the MSI MAG B550 TOMAHAWK?
Yes
Yes. It fits and runs at 3200 MT/s with XMP enabled.
- Expected speed
- 3200 MT/s
- Default speed
- 2400 MT/s
- Slots
- A2 and B2
- Maker-tested
- not listed
Speed
- Out of the box: 2400 MT/s. Every kit starts at a safe default speed. Turn on XMP in the BIOS to run it at 3200 MT/s. If Task Manager shows 2400, that's why.
- Intel profile on an AMD board. Most AMD boards can load XMP profiles. It usually works, but EXPO kits are the ones tested for AMD.
- Use slots A2 and B2. The second and fourth slots from the CPU. Two sticks in the wrong pair may not reach full speed.
Amazon links are affiliate links. As an Amazon Associate we earn from qualifying purchases.
Questions
Will the Kingston FURY Beast DDR4-3200 CL16 work with the MSI MAG B550 TOMAHAWK?
Yes. It fits and runs at 3200 MT/s with XMP enabled.
What speed will the Kingston FURY Beast DDR4-3200 CL16 run at on the MSI MAG B550 TOMAHAWK?
Up to 3200 MT/s with XMP turned on in the BIOS. Out of the box it boots at 2400 MT/s, so Task Manager will show 2400 until you enable the profile.
Which slots should I use on the MSI MAG B550 TOMAHAWK?
A2 and B2, the second and fourth slots from the CPU. That runs the kit in dual-channel mode.
Has this kit been tested on the MSI MAG B550 TOMAHAWK?
Not in the compatibility lists we've checked. Kits that aren't listed usually work too; the lists only cover what the manufacturer had time to test.
Do I need to change anything in the BIOS?
Yes, one setting: enable XMP (on some AMD boards XMP is listed as DOCP or A-XMP), then save and restart.
All RAM for the MSI MAG B550 TOMAHAWK All boards for this kit